News
Center
Home » News
Center
Plastic Injection Mold Part, Suitable to Apply in Automobile Spare Parts, OEM
Orders are Welcome Key Specifications/Special Features: Abundant professional
mold making experiences and more than ten years exporting history Mold for all
kinds of plastic products Customizes design are …
Injection Mold, Made of ABS/PC, Used for Remote Controller, Comes in Various
Shapes
Injection Mold Tool with LKM Base, 300,000 Shots Lifespan and 1 x 1 Cavity,
OEM Orders are Welcome
Injection Mold, Specialized in Manufacturing Precision Plastic Mold and
Stamping Die
what is injection molding, Injection molding, china injection molding,
China mold factory can supply plastic mould for kinds of pipe fittings, such
as PPR PVC PE PB ABS…to the world. China mold factory has more and more
understanding of polymers and the mold manufacturing process of the various
parameters and change more and more in-depth understanding.
Shrinkage is inherent in the injection molding process. Shrinkage occurs
because the
density of polymer varies from the processing temperature to the
ambient temperature
(see Specific volume (pvT diagram)). During injection
molding, the variation in shrinkage both globally and through the cross section
of a part creates internal stresses.
We are professional china injection mold maker, to satisfy our customer’s
requirement and improve our service. We should implement 5s in our company.
Generally speaking, injection mold makers are not the easiest bunch of skilled
craftsmen to guide, especially with something such as 5S. However, now that the
economy is so global, and it is not so easy to just pack up your tools and head
down the street to a waiting job, this is a great time to initiate a lean
program. The days of the rugged individual toolmaker calling his own shots are
over. Used to be that a skilled mold maker could pretty much pick how he wanted
to do things, and as long as the job was done correctly and on time, everyone
was happy. This does not work anymore, for a variety of reasons. Specialization,
short lead times, job complexity, and lean manufacturing are the main reasons.
5S fits in perfectly with this new paradigm. Mold making is sort of like
controlled anarchy in many ways. If we lived in a perfect world, it would be
like a benevolent dictatorship, but we don’t live in a perfect world.
Variable residual stresses arise and the part deforms as layers of different
frozen-in specific volume interact with each other Process-induced residual
stress data are much more useful than in-cavity residual stress data for molding
simulation. Following are definitions of the two terms, along with an example
that illustrates the difference between them.
we are very professinoal plastic injection molding company in china,So I
would love to introduce you the process of plastic injection molding.
All of this resin material started out generally as plastic pellets. The
pellets are feed into one of the massive injection molding machines, these
injection machines often weigh around 25 tons. The machine heats the plastic
until it is liquid. This liquid is then forced through injectors into injection
molds.
Furthermore, asymmetrical thermal-induced residual stress can occur if the
cooling rate of the two surfaces is unbalanced. Such unbalanced cooling will
result in an asymmetric tension-compression pattern across the part, causing a
bending moment that tends to cause part warpage. This is illustrated in Figure 3
below.
China plastic injection molding company
China plastic injection molding companies now are facing the heavy pressure,
it is because of the currency exchange rate, inflation and heavy competitive of
domestic China injection molding company. Below is the detail reason for the
heavy pressure of china plastic injection molding company
